The Innova Biltmor Step includes two handrails, a non-skid surface, and safe, closed sides that permit water circulation yet prevent child entrapment.
The Innova Biltmor Step includes two handrails, a non-skid surface, and safe, closed sides that permit water circulation yet prevent child entrapment. Made from UV-resistant polyethylene the enlarged front lip allows for gentle contact with the liner. The Biltmor is ergonomically designed to support up to 350 pounds. It is 25” wide and 36” deep. The height of the inner step from floor to top step is 42”. The outer self-closing, self-latching section EXCEEDS BOCA Requirements. It is 26” Wide. There is 7” from the ground to the bottom of the gate, and the latch is located 56” inches off the ground.
Key points of Building Code compliance include:
- Section 421.5.5, item 2: Treads are a maximum of 12 inches uniform in height.
- Section 421.10.1, item 1. Minimum barrier height of 48” inches from the ground level.
- Section 421.10.1, item 3. Smooth finish and design does not contain protrusions/indentations which can be climbed by young children.
- Section 421.10.1, item 8. Equipped with a locking mechanism which is self-closing and self-latching located more than 54” from the ground level. Access door opens outward from the pool.
Because building codes vary, we recommend you check with your local building department to see if this ladder will meet local building codes.
Download Brochure – Steps
Download Brochure – Self-Latch Ladder
Extend the life of your liner with a high density, crack resistant, durable vinyl liner mat. The most vulnerable area for a pool liner is where you enter and exit the pool. To protect against friction and abrasiveness, invest in a ladder/liner guard, which rests between your ladder and liner.